Give your Crewman Cross 8/One Tonner Cross 6, a real brake bite for more enjoyable driving!

Product Code: 
HD-CM08
Holden Crewman AWD Cross 6/8, One Tonner Cross 6, 2003-2006
Applicable models: Suits Crewman AWD Cross 6/Cross 8 and One Tonner

Compatible calipers: Standard Crewman Cross 8, One Tonner Cross 6 front and rear calipers. 
Compatible fluids: DOT 3, DOT 4, DOT 5 (Silicone), DOT 5.1 (Glycol Ether/Borate Ester)

Note: 
(Rear chassis to axle lines is not supplied, because we unable to fabricate the side-by-side twin lines, fixed to a single mounting block). However, excellent brake performance improvement can still be realised. No issue with brake bias problem as all 4 axle installed with performance lines. Hydraulic pressure at the chassis to axle lines is quite low due to rear brake bias of approximately 40%.

Note: Even though only 4 calipers lines/hoses were installed (with chassis to axle hose remains original) braking performance has improved according to customer's feedback. 

Includes in the packaging are:

Front left axle = 1 hose
Front right axle = 1 hose 
Rear left axle = 1 hose
Rear right axle = 1 hose

Total: 4 hoses kit

- Warranty Card
- Suggestion for Safety
- Limited Warranty (Terms & Condition)
- Installation Suggestion

Installation Note: 
This SAFEBRAKE brake hoses kit fit like standard part, without modification required.

5 Years Warranty

Our Quality Commitment: When you purchase SAFEBRAKE® brake hoses, you get peace of mind knowing that you are entitled to five years warranty. Even though we are confident that our product will last the lifetime of your car, we offer an active 5 years warranty so we able to monitor your satisfaction in using our product. The warranty will give you full replacement of the product should there are defects due to manufacturing. (Please refer to our Warranty Terms & Conditions)

This is our commitment to ensure the reliability of our products and quality acknowledgement. Thank you for your kind support.

SAFEBRAKE

related items

Demo Options

Background only applies for Boxed,Framed, Rounded Layout